 |
Current news
|
|
|
New gratings for ANRIN Reinforced edge channels
|
|
After finishing the revision of the channels base parts - particularly in the joint area - now there are several new designs for gratings
available. Additionally to the approved slotted, meshed or perforated
gratings made of galvanised or stainless steel, ANRIN is currently
offering main bar - and cross bar gratings for KE-100 channels in the load classes A15 and B125. Moreover the exclusive OvalGrip design is now represented as a plastic grating made of polyamid in the load classes B125 and C250.
Also the ANRIN Heavy Duty Channels can right away be supported with cast iron gratings in the load classes D400/E600 and F900. |
|
|
| Exhibition activities ... |
|  | From 15 to 18 September 2010 in Nuremberg GaLaBau, Europe’s most important fair
for design, construction and maintenance of green and urban spaces will be on
the agenda.
We would be pleased to welcome you on our stand.
|
|
|
|
|
ANRIN product quality and quality management ... |
| The
urge to set up a quality management system came from within our own
company. The requirements of the building products directive and DIN
ISO 1433 were rigorously implemented last year. The greater part of our
products was also successfully approved by KIWA in compliance with KOMO
(certificate dated 1.2.2006). The QM system under DIN EN ISO 9001:2000
forms the basis for the organisation of all processes within the
company. We endeavour to constantly improve our quality management
system by motivating and training our employees, documenting faults and
adopting suggestions for improvement. Certified under DIN ISO 9001:2000
since 30.08.2006.
| |
 ISO 9001 Zertifikat vom MPA
|  KOMO Zertifizierung von Kiwa | |
|
|
|
| New: Optimised ANRIN SELF range |
| |
Our most popular channel system, the SELF
range, received a complete makeover in the course of last summer. The
shapes were technically modified. For example, all channels received
the typical ANRIN UNILINK joint system. The gratings and locking
techniques were also adjusted to meet the current standard.
In
particular, the provision of flush-sided slotted covers in galvanized
steel for installation in the linear drainage channels of ornamental
surfacing should be particularly attractive for end customers. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
ANRIN Contact
ANRIN Anröchter Rinne GmbH
Frau Petra Broermann
Siemensstr. 1
D - 59609 Anröchte
Tel: +49 (0 ) 29 47 / 97 81-0
Fax: +49 (0 ) 29 47 / 97 81-50
Mail:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Web: www.anrin.com |
| |
| |
| | |
|