The grate is representative of the entire design line.
Plastic grating
Material: polyamide
Length: 100 cm
Load class: A15
Length: 100 cm
Load class: A15
Matching channel body
SELF PP Plastic channel
Load class:
A15, B125, C250
Load class:
A15, B125, C250
ANRIN plastic drainage channels
ANRIN plastic channels from the PP and PP EVO series are made from polypropylene (PP), an unbreakable, solid black plastic. Their light weight and ribbed edge profile make them easy to install and ideal for applications in residential construction.
| SELF PP Plastic channel product specifications | |
|---|---|
| Material | plastic polypropylene, polyamide (black) |
| Length | 100 cm |
| Width | 12.1. 13.1 cm |
| Height | 6.3. 8.4. 10.0. 16.0. cm |
| Weight | 1.6 - 1.8. 2.2. 2.7. 3.9. 7.3 kg |
| Nominal width | 100 |
| Joint formation | overlapping joint with latching system |
| Clasp | Snap-in fastening, TwistLock fastening |
| Load capacity | A15 (test force 15 kN) to C250 (test force 250 kN) |
| Grating | Plastic grating, Plastic grating, Slotted grating, Slotted grating OvalGrip Design |
Channel dimensions for SELF PP 080
ANRIN UNILINK®-Joint
The optimised UNILINK® joint system eliminates the traditional differentiation between the beginning and end of the channel. Elements of an equal installation height can be joined in any arbitrary direction. The symmetrically divided half-joints enable the optional sealing of the splicing. Vertically aligned grooves and tongues support an efficient installation: In the process, the installation alignment can be chosen arbitrarily!
The flexibility in the design and installation phases enters a new dimension with the UNILINK® joint!
ANRIN Screw fastening
Decades of experience and detailed product development in the areas of assembly, maintenance and cleaning of drainage systems have produced impressive solutions for permanent fastening technologies.
ANRIN fastenings are optimised for the specific load classes and unite reliability and high quality with functional design.
ANRIN Snap-in fastening
Decades of experience and detailed product development in the areas of assembly, maintenance and cleaning of drainage systems have produced impressive solutions for permanent fastening technologies.
ANRIN Snap-in fastenings are optimised for the specific load classes and unite reliability and high quality with functional design.
Accessorie for SELF PP 080
Adapter
with screws for linking with DN 100 pipe connections
SELF PP
End wall pair
080 for channel tongue and groove
SELF PP
End wall pair
SELF PP
Sump unit
SELF PP
Accessories dimensions for SELF PP 080 closed end cap
SELF installation instructions
With ANRIN drainage systems, accumulating rainwater should be drained safely and quickly. Moreover, the structural elements have the task of accommodating dynamic loads arising from traffic-related demands and dispersing them to the area of the foundation.
Amongst others, the following technical rules and regulations in their respective valid versions must be observed for the selection, design and installation of ANRIN drainage systems.
The following installation guidelines are schematic representations. These are provided as examples and are non-binding. The information provided here is based on our long-term experience in excavation and road construction as well as the state-of-the-art technology. Despite this, designers and planners are always obligated to check the products and the installation instructions for their appropriateness. The example details are simplified recommendations for execution.
Constructions are to be re-created on a project-specific basis.
1.
Excavate trench. Fill in and pre-compact base course. Apply concrete pad, 3 parts sand + 1 part cement + 1 part water, to base course.
2.
Connect pipe connections to the pipeline.
3.
Place channel elements and sump unit on the concrete pad. Align components so that they are level.
4.
Position end caps.
5.
Complete the series and ensure the level alignment of the components.
6.
Backfill the concrete pad.
7.
Lay the paving.
8.
The surface should be 2 to 5 mm higher than the cover grating.
Instructions and Regulations
Guidelines and regulations
The current guidelines and regulations of the state-of-the-art technology must be observed for the installation.
For example, these are:
DIN EN 1433 „Drainage channels for vehicular and pedestrian areas“
DIN 19580 „Drainage channels for vehicular and pedestrian areas“
RStO „Guidelines for the standardisation of the superstructure of vehicular areas“
DIN EN 206-1 „Concrete. Specification, performance, production and conformity“
DIN EN 1045-2 „Concrete, reinforced and prestressed concrete structures. Part 2: Concrete – Specification, properties,
production and conformity; Application rules for DIN EN 206-1“
Das ausgewählte Rost ist nicht in der Belastungsklasse verfügbar. Möchten Sie zur Rost-Übersicht für die gewünschte Belastungsklasse?
Das ausgewählte Rost ist nicht in der Nennweite verfügbar. Möchten Sie zur Rost-Übersicht für die gewünschte Nennweite?
Das ausgewählte Rost ist nicht mit diesem Material verfügbar. Möchten Sie zur Rost-Übersicht mit dem gewünschten Material?
Das ausgewählte Rost ist nicht mit dem gewünschten Filter verfügbar. Möchten Sie zur Rost-Übersicht?
